Determination of distance in a shooting scene Essay

Determination of distance in a shooting scene Introduction            Distance determination is an activity that is carried out to determine the distance at which a fire-arm was shot from in a crime scene. It is also a calculation done by the examiner to indicate the really distance of shooting in a crime scene. It is done to approximate the actual point from which a person was shot, something that is evident in the gun residue, that is, gunpowder from the muzzle to the target (Saferstein, 2011).            Forensic science has been of great help in investigating crimes in all ways that the crime is committed helping the investigator apprehend the criminal (Saferstein, 2011). The laboratory is not only used for the blood stain, it is also used to examine the weapon used in committing the crime for example a gun. The firearms suspected to have been used or involved in a crime are taken to the laboratory for investigation and examination to help establish the source and whether the firearm has ever been used in addition to the owner (Saferstein, 2011). This is done using a microscope that magnifies the cartridge used. The gun is used to determine the distance using the muzzle. The investigator can shoot from different angles using the same type of gun then checks the hole and measures the diameter used from the gun and the gunpowder will give clear indication of the distance (Saferstein, 2011).            The gun is used to determine the distance using the muzzle the investigator can shoot from different angles then checks the hole and measures the diameter of the muzzle from the points and then compares with the hole of the actual incident (Saferstein, 2011). Therefore, the muzzle-to-target analysis can help in determine the distance of the shooter to the target. The gunpowder is beneficial to the investigator because it leaves a pattern and enables the investigator to match the firearms used and the how the shooting took place (Saferstein, 2011). Reference Saferstein, R. (2011). Criminalistics: An introduction to forensic science. Upper Saddle River, NJ: Prentice Hall. Source document

Developmental essay

The term development means a progressive series of changes that occur as a result of maturation and experience. This means that development does not consist merely of adding inches to one’s height or of improving one’s ability. Instead it is a complex process of integrating many structures and functions. Many theorists have proposed concepts or theories on the developmental aspect during adolescence. One of these theories is Erikson’s Eight Stages of Development.The goal of developmental changes is to enable people to adapt to their environment in which they live. To achieve this goal, self- realization, or, as it is some times called â€Å"self- actualization† is essential. I have known an adolescent long ago, he was my neighbour. He used to be my childhood friend then. I have seen him since he was still five years old. During those times I already see him lacking the self- confidence, very pessimistic, he has fear of wrong doing and over control and over restriction of own activity.When he was in his school age, six to twelve years old; I was just surprised seeing him very creative, and already developed a sense of competence and perseverance. When he reached his adolescent stage, I noticed that he has a coherent sense of self and always plans to actualize one’s abilities. There will be a very great difference in the development aspect of a person if he belongs to an ethnic or a dominant culture. Development is influenced by many factors and these are appearance, behaviour, cultural stereotypes, cultural values, role changes and personal experiences.Behaviour is influenced by the environment the person has been brought up to. When behaviour changes are disconcerting, as during puberty and senescence, they affect attitudes toward the changes unfavourably. From mass media, people learn cultural stereotypes to judge people of those ages. Every culture has certain values associated with different ages. Because maximum productivi ty is associated with young through early middle age adulthood in the American culture of today, attitudes toward this age group are more favourable than attitudes toward other ages.Personal experience also has profound effects on an individual’s attitude toward developmental changes. Self- esteem greatly plays an important role in identity development of an adolescent. Self- esteem is one’s perception towards his self- worth, appearance and how other’s sees him in the society. So when one has a very negative or low self esteem then that would greatly affect his development and how he interacts with the people around him.Parents and teachers should let the adolescents explore and socialize. In that way they would develop their self- confidence. They should help them learn the degree to which assertiveness and purpose influence their environment as well as the beginning ability to evaluate one’s own behaviour. They should inculcate in their minds that ever y individual is unique in so many ways and that every person is indeed biologically and genetically different from every one.

Persuasive Writing on topic of Animal Rights Essay

Deceased: Monday, November 5th, 2001. Great Britain’s Prison Service has reported that animal rights terrorist Barry Horne, 49, died in a Worcester hospital on November 5 after a short-lived hunger strike. The official cause of death was liver failure. In 1997, Barry Horne was sentenced to 18 years in prison for carrying out vicious attacks and arson on legitimate facilities that he claimed promoted animal cruelty. His attacks put human beings in danger for animals, animals without sentience, the ability to realize that they are alive. Animals without the ability to distinguish thought. This essay will focus on animals we consume for our nutrition. Animals without the basic goal of human beings of life, liberty, and the pursuit of happiness. The human race cannot give these rights to living organisms without the goal of the unalienable right and without the basic comprehension of consciousness. Animals are ignorant of the basic sentience and self-awareness, everything is an an imal and we are not exempt, and reasoning that we should solely eat plant proteins because we have the intelligence to, and the wolf doesn’t, so therefore we should make the wolf our equal is self-contradictory. The human race has come up with criteria for judging the sentience of a organism. There are five basic building block of society, which are the criteria for judging the sentience of an animal. The starting point for any species is if they were observed as producing or having produced technological artifacts unique to that species. Next, if they were observed as able to communicate from one generation to the next by a recorded language unique to that species, that is a significant leap. An important pair is being observed as basing action on abstract reasoning and being observed as engaging in inductive and deductive reasoning processes, and finally, observed as engaging in non-utilitarian artistic activity unique to that species. No other species besides man has five basic building blocks of society. Animals eat, eat, reproduce, and die. We, as human beings, are predators. We eat other animals. We need to eat. Zoomorphism only happens when we aren’t worried about eating. If we were not sentient we would still eat animals. By the â€Å"survival of the fittest,† which is the law of raw nature, no animal has rights; only the tools to survive as  best it can. The chicken has no right not to be eaten by the fox. The gazelle has no ethical recourse against the lion. If we are merely animals, no other animal has any ethical standing to complain against the human animal for eating them or wearing their skins. The basic rational or â€Å"credo† for animal rights consists of changing our diet to exclusively vegetable proteins, based on the notion that human beings have the intelligence to choose to eat soy beans in preference to cattle but wolves can’t — and this superior human reasoning ability is a reason to consider animals such as wolves as our equals. Look at the last sentence of the animal rights credo, â€Å"This superior human reasoning ability is a reason to consider animals such as wolves our equals,† and therefore realize that that argument admits we are superior, so we should be equal. This argument is similar with â€Å"2=0†. The rational itself is contradictory. Animal rights failed on three other arguments as well. First, human beings are the dominant species on this planet, making decisions regarding use of the land, the sea, the air, and the near space above the air. Man rules and animals have to take what we do with them and lump it. The penultimate argument is there are no animals petitioning mankind, their â€Å"oppressor,† for an elevated status or recognition of their rights. Third, there are no animals contesting their status as inferiors to mankind. Animals aren’t protesting for their rights, it is human beings. Animals are not asking for their rights. How do we know to give them rights? If they are sentient, how do we know that they want rights? It is human beings who are asking for rights for animals, but their rational is insufficient. So let’s be prepared for animal rights activists, because after the death of Barry Horne, there are some people who may regard him as a martyr. That includes people who may want to carry out actions against on legitimate scientist working with animals to promote human being’s needs. No animal rights activists are themselves animals. There is no organization called Porpoises for the Ethical Treatment of Animals. It is people who make those demands of other people. Essentially brainless work animals should not be considered on the same level as sentient human beings. Animal Rights is the philosophy of allowing non-human animals to have the most basic rights that  all sentient beings desire: the freedom to be exempt from this web of dog eat dog, the food chain, the survival of the fittest.

Organizational Strategy Assignment Example | Topics and Well Written Essays - 250 words

Organizational Strategy - Assignment Example The level of input and the outcomes is also a major factor to be considered. The second stage is to think of how to change the current situation. Discover all areas that change requires implementation, and how to go about it. The final stage is to think of where one would want to reach and within what period. This creates a motivation to put more effort in implementing the change. Ones the changes are being implemented, there is a need to evaluate their efficiency and if they are competent, they should constantly be implemented (Kaufman, 2003). Celebrating the hard work is done once the desired outcomes are achieved. Change requires commitment and persistence. Organizational changes are usually painful and, especially, to those with the status quo, therefore, there is a requirement for all those involved to accept the need for change. Many are the time people involved persist the change and tend to be confused with the happenings (Plas, 1999). Organizational management is a big task and therefore, there should be sponsors and advisors who will advise according to change implementation. In today’s market, organizations need to implement changes due to the completion and the technological changes that are occurring in the

Accounting Assignment Example | Topics and Well Written Essays - 2250 words

Accounting - Assignment Example According to data revealed from the New York Stock Exchange, the company is traded under the ticker symbol of WMT. Currently it yields a price earnings ratio of 15.48 with a beta coefficient of 0.24. With 3,810,170,000 of outstanding shares, the company has a market capitalization of USD 202.47 billion. The performance of Wal-Mart has improved steadily over the last three years. In the year 2007 the company reported an annual turnover of $344759 million which has risen to $401211 million in the year 2009. This marks an increase of nearly 16 percent. The operating cost of the company has remained stable at approximately 95 percent for the last three years. Wal-Mart has been successful in managing the operating costs of the company. There has been a rise in the interest cost on debt of the company that has moved up from $1549 million in 2007 to $1896 million in 2009 which is a rise of nearly 22 percent. This is due to the rise in the debt component of the company. The net income of the company has steadily moved up over the years. In 2007 the company reported a net income of $11284 million that increased to nearly $13400 million in 2009, an increase of nearly 18 percent. The cash position of the company has improved significantly over the previous year. Cash and cash equivalents of the company was $5569 million in 2007 and this increased to $7275 million at the end of the financial year 2009. The current ratio represents the ability of a company to meet its short term liabilities out of its current assets. Investors view current ratio as a measure of the liquidity condition of a company. As per the theories this ratio should be 2:1 which means the company retains current assets which are double the amount of current liabilities, but the bench mark varies from industry to industry. Wal-Mart’s current ratio has improved in 2009 as compared to 2008, hence the company has enhanced its liquidity position and the risk associated with short term solvency

Case2 599 Coursework Example | Topics and Well Written Essays - 1500 words

Case2 599 - Coursework Example The first model that this paper analyzes is the Force Field Analysis organizational model. It was developed by Kurt Lewin, in the year 1951. This model analyzes and identifies the restraining factors that hinder an organization from achieving its goals (Beech and Macintosh, 2012). It also identifies the driving factors that make the employees of an organization to successful implement the policies of the institution. For example, better pay structure can be a driving force that encourages employees to work harder within an organization, while lack of a clear organizational policy can be a restraining factor that makes employees not to work harder for the fulfillment of the organizational goals. After identifying these factors, this model then plans the strategies that the organization needs to use. The major weakness of this model is that it relies heavily on the process of change, and it doesn’t identify the manner of changing the strengths and the weaknesses identified (Fall etta, 2013). Another model under consideration is the McKinsey 7S model developed in 1982. The model has seven variables, which are staff, skills, structure, strategy, shared values, style and systems. The developers of this model denote that the seven variables are crucial for managers and owners of business organizations. Skills refers to the ability of an individual to carry out his or her functions, staff refers to the people working within the organization, style is the manner in which the managers of an organization conduct their affairs for purposes of achieving their objectives, while the shared values refers to the guiding principles that members of the organization have in common (Harrison, 1994). The developers of this model refer to strategy as the plans put in place to allocate resources for purposes of achieving the goals of the organization. Systems are the day to day procedures followed by members of the organization. This model denotes that to achieve desired change within a company, it is important to analyze all the seven variables; and improve on them. However, one major weakness of the model is that it does not

Entrepreneurship, innovation, economic development, and sustainability Essay

Entrepreneurship, innovation, economic development, and sustainability - Essay Example Burj-Al-Arab, and Burj Khalifa that even supersedes the hotel. By the end of 2008, the world in general and the UAE in particular were hit by the global financial crisis. As a result of the economic downturn, entrepreneurs rapidly started drawing their money out of the UAE, particularly Dubai. This further aggravated the condition and increased the economic challenges for the UAE. The sale of innovative products in the present age amounts to 33 per cent of the total sales of a company (Cooper, 2001, p. 4). While so many people talk about innovation, there are not many who understand what it means truly. For many people, anything that is new in some way is innovative. â€Å"[C]reativity is commonly defined through the recognition of produced and valued novelty† (Martin, 2009). Innovation is in many cases, a reinvention of old things by combining their features in a unique way. Basically, innovation happens from ideas that are unique. The idea of one individual might never have been experienced by another and thus when it is incorporated into a new product, it becomes innovative (Boden, 2004, p. 13). Many studies aimed at identifying common personality traits in creative people have successfully identified some (Amabile, 1996, p. 5). Irrespective of what qualifies as innovation, a factor whose importance cannot be overemphasized for the economic development as well as sustainability is the usefulness of the product for the society at large. â€Å"Attempts must be made to address the potential unintended and unforeseen consequences of the technology, as well as its potential benefits, if it is to be successfully applied† (Hall and Martin, 2005). â€Å"†¦creation is a continuous process... This essay present a thorough theoretical analysis of the impacts that economic categorical concepts of entrepreneurship, innovation, development and sustainability have on each other. These concepts are all strongly interrelated The sale of innovative products in the present age amounts to 33 per cent of the total sales of a company. Creativity is commonly defined through the recognition of produced and valued novelty Innovation is in many cases, a reinvention of old things by combining their features in a unique way. Basically, innovation happens from ideas that are unique. The idea of one individual might never have been experienced by another and thus when it is incorporated into a new product, it becomes innovative. Many business entrepreneurs think of sustainability and the need to adopt environment friendly business practices as a burden whereas in reality environmental-friendliness not only cuts down the costs of business but also increases its profitability, which is what makes sustainability integrally related to both entrepreneurship and innovation. Sustainability is quite as strongly linked with economic development and the logic behind it is quite understandable and simple; the lesser the costs and the higher the profits in business, the greater the contribution of the entrepreneurs in the gross domestic product of the country, and the more the economic development consequentially. Sustainability saves the country’s resources that can be utilized in better ways to yield more money.

How the Roman Republic decayed and became the Roman Empire Essay

How the Roman Republic decayed and became the Roman Empire - Essay Example The prominence of Rome Rome was a small province town which after many wars became the focus and command center of the vast empire of Rome. However, history tells us that it took hundreds of years and a combat of many wars to rise to this prominence. It gained influence over a significant portion of southern Europe, northern Africa, and Middle East. Rome conquered nearly all the surrounding territories going beyond the Mediterranean Sea. It was this military dominance in the region that helped the Roman republic rise and became a formidable force of influence. The republic had appeasing methods of keeping her citizens happy and content. In this endeavor, Rome respected and protected the people’s local cultures with the sole purpose of keeping the people pacified. The Romans in their quest for improved stability, offered a healthier way of life to her war captives, giving them protection, improved mode of doing business, and the freedom to share in her civilization, like the hi gh quality road network. The import market was enhanced, and more affordable goods were made available to the citizens. Under the roman rule, the public enjoyed better and improved livelihood than in their previous regimes. The Roman social planners developed a plan on how to facilitate distribution of economical products such as food that used to contribute to widespread riots. This proper food allocation to its citizens that spread across the whole regime made it gain prominence. Rome’s geographical location’s place of control was another contributing factor. Its control over the Mediterranean Sea gave the regime sizeable amount of dominance. The Roman Republic The founding of Rome is not conclusively documented, in that there is scanty information on how it was initially conceived to its prominence. Nonetheless, mythical explanations state that Rome was initially ruled by kings as a monarchy for many years. As a republic, it began by the overthrow of the traditional roman monarchy, an event that ushered in the introduction of a government that was headed by two representatives. Annual elections were conducted to elect new representatives to head the government. Subsequently, a constitution representing the will of the people was developed. The enactment of this constitution was largely as a result of the struggle between the Patricians and the Plebeians in the effort of the Plebeians trying to prevent Patricians dominance of power. The constitution enabled the participation and representation of everyone at the national level of public affairs, without dominance of a party or ethical group. The fall of Roman Republic The fall of the republic of Rome was motivated by social reasons, military reasons, political reasons, and economic reasons. The fall began with political rivalry within the ranks of power which spread to the city where rival gangs supporting their leaders furthered the rivalry. The two political leaders were Pompey the Great and Julius Caesar. Their rivalry was promoted by their indifference in political leadership when Pompey was appointed, against the spirit of the constitution, to head the consul alone. This angered Caesar who waged war against Rome forcing Pompey to flee. Military Reasons During the roman republic, the army was comprised of citizen soldiers who went to war in defense for their country for some years. This was the product of Rome spreading its territorial control, where the soldiers were

Abraham Lincoln and the Civil War Essay Example | Topics and Well Written Essays - 750 words

Abraham Lincoln and the Civil War - Essay Example This has been an argument for the root cause of the Civil War by many. However, high taxes alone were not enough of a catalyst to start a war. Others maintain that the reason was states right, the right for states to own slaves. Free labor drove the Southern economy. Without slavery the white privileged would go broke or worse, have to work themselves. Besides; what to do with all the freed blacks? Southerners were not ready to have blacks as neighbors and were frightened of retribution. Poverty and fear are reasons to start a war. Abraham Lincoln’s Emancipation Proclamation is remembered by history as an altruistic humanitarian effort but it was more a brilliant tactical move. History did get the importance aspect right, the slaves were freed, the union preserved and Lincoln the architect of it all during the most tumultuous time in American history. It was about slavery. Southern states thought of Lincoln as â€Å"an obscure and illiterate man† whose â€Å"opinions a nd purposes are hostile to slavery.† (Ball, 2010). As each state formerly left the Union it cited slavery as the main reason for secession. Hard-line secessionists were rightfully convinced that Lincoln’s election would result in the freeing of slaves. Known as ‘Fire-eaters,’ they used shame and fear to convince wavering Southerners of their stance, that slave-owning states had no choice but to form their own country. â€Å"Resistance or submission† was the fire-eaters rallying cry. Southerners were implored to defend their rights. Those who resisted were publicly humiliated, branded as cowards. Events such as John Brown’s Raid helped the fire-eaters to convince people to join their cause. Panicky white men joined vigilante groups which targeted Northern sympathizers and former slaves meaning, to them, any black person. (Barney, 2004). Prior to the start of the Civil War Kansas experienced the wrath of fire-eaters paramilitary terrorist groups when its citizens were deciding whether or not to become a slave state. They used intimidation as a tactic to get the desired results. In retribution for their reign of terror, John Brown led a group of men who killed five pro-slavery settlers then stole guns from the military at Harper’s Ferry so to continue the fight but were stopped prior to committing more killings. Coincidentally, Brown and his followers were captured by future commanding Confederate General Robert E. Lee who was leading a group of marines at the time. (KEDT, 1999). Unfortunately for Brown his actions ultimately led to his execution by hanging and generated greater support for the pro-slavery faction. Lincoln was an adamant believer in the idea of the U.S., in democracy and individual freedom. He wanted America to be the shining example for other nations to follow. He knew that if the country became divided it would be widely perceived that the grand experiment of democracy didn’t work, a travest y on a worldwide, historic scale. Lincoln insisted that â€Å"the unity of the nation must be maintained. If the nation breaks up, the democratic mission is dead.† (Coker, 2013). As late as 1860 Lincoln said that blacks were entitled to some rights but not to vote or hold office. He had strongly suggested blacks be sent to live elsewhere, ‘rounded up’ so to speak but with the War still very much anybody’s to win and enthusiasm waning, Lincoln needed a new strategy. He added a new element to the struggle by proclaiming all slaves free in 1862. It was now society against society in addition to army against army, a battle of conscience fought alongside a battle of weapons; the former Lincoln thought he was surer to win. He was never considered a military genius but demonstrated his

Masculinity and Violence in Fight Club and Drowning Tucson Essay

Masculinity and Violence in Fight Club and Drowning Tucson - Essay Example However, when â€Å"a generation of men† is raised by women, there is no â€Å"male example† (Palahniuk 50) to follow and males only have that urge for liberalization and the need to ascertain their masculinity. One can see that the Tyler in Fight Club is the real macho man who tries to struggle away from the feminized Narrator, or, in other words, Tyler is the real male self of the Narrator. In fact, what Palahniuk points out and what the reader feels is that real masculinity involves surplus aggressiveness and sexual and emotional desires. In the real society, most males are forced to employ surplus repression to look civilized. Thus, there are institutions of male bonding which offer them a way to unleash this hidden aggression in the safest possible way. They engage in fist fight in such institutions and enjoy a sense of power. In the novel, the Narrator is a person who has lost his sense of manhood. He does not have a name, lives alone, and is unable to make health y relations with others. This extreme pain and alienation makes the real man in him struggle away and become Tyler who wants to become the leader of the â€Å"space monkeys† (Palahniuk 132).... The more comfortable the Narrator becomes with Marla, the more detached he gets with the destructive plans made by Tyler. Finally, by the time he admits he likes her, the Narrator is in total contradiction with Tyler, and eliminates him (Palahniuk 15). However, the men who are still isolated continue demanding the return of the anarchic Tyler. At least the Narrator realizes Marla is not the reason behind anarchy. Thus, one can see that there are various factors Palahniuk tries to point out as the reasons behind violence. The first one is the lack of role models of maleness for the new generation which is often brought up in a feminized society. The feminist era took away everything that is good as the virtues of femaleness and men of the post-feminist period were left with nothing more than mere ambiguity regarding masculinity and parenting (Palahniuk 141). The second important factor is the ‘homophobia’ developed by men in a patriarchal society. It is admitted facts tha t many hate crimes occur as a result of doubts over sexual orientation. In Fight Club, the Narrator gives Angel Face a severe beating to see that his beauty is reduced because the Narrator hates the favoritism Tayler shows towards him. (Palahniuk 96) Evidently, males have their own ways of measuring masculinity. To illustrate, in Fight Club, it is seen that the ability to conquer a woman is an important aspect of deciding ones maleness. As a result, there is a kind of rift between males that arises out of this competition to win women, and in the novel, there is a great degree of tension between Tayler and the Narrator in this regard. (Palahniuk 113) Thus, it becomes evident that men’s lives are structured around aggressiveness and power relations. The highly phallic notion of masculinity

Luxury Good and Gucci Essay Example for Free

Luxury Good and Gucci Essay Gucci‘s overall strategy was to vertically integrate to strengthen its overall brand image. After vertically integrating they acquired other luxury retailers to continue to grow horizontally and to increase economies of scope. The economics of the luxury goods industry changed forcing Gucci to modify its strategy. Consumers demand shifted from classic style buyers to style conscious buyers. Gucci not only had to change due to the economics of the industry but they also had several problems with their existing structure. Hence Gucci made the following moves to reposition it to compete in the new economics of the luxury goods industry. Gucci The partnership between DeSole and Ford addresses the company’s inability to have streamlined decision making and consistent branding throughout the company. By partnering product design and strategy, Gucci can now make product and business decisions that deliver a consistent message externally. All products and communications will support the brand image of a luxury goods retailer that Gucci wants to deliver to the marketplace. The cost cutting and targeted layoffs address Gucci’s poor cost structure. While profit margins were healthy, the extravagant spending by the former CEO was reducing profitability. The company had excess headcount in some areas and less in others. The layoffs improved Gucci’s cost structure and streamline the organization. Secondly, Gucci lacked the management talent to run a high end luxury company. By laying off underperforming managers and hiring experienced business executives, Gucci significantly improved the quality of its management team. The cash investment by PPR protects Gucci from hostile takeovers by competitors. The improvement in Gucci’s capital structure enables Gucci to move from an acquisition target to a potential acquirer of substitutes and new entrants. This is critical because in the fashion industry, new brands are always emerging in the market. The $3 billion dollar cash investment enables Gucci to protect its core market better. Additionally, the acquisition of YSL through the merger diversifies Gucci’s product portfolio and creates high barriers to entry. Buyers Due to changing consumer demands, Gucci started to focus on fashion in particular the â€Å"glamorous edge. † Since switching cost for consumers are low and consumers are now demanding new fashions every season focusing on seasonal trends competitively positioned Gucci against its rivals and impeded consumers from finding substitutes. Gucci changed its target consumer from an older more conservative buyer to a modern, youthful, fashion conscious one. Since all of Gucci’s competitors had the same target (30-50 year affluent women) going after a modern, youthful spirited consumer allows Gucci to focus on a different segment of the luxury market, capturing a different slice of the pie. To create loyalty, give consumers options, and to prevent consumers from switching and buying a substitute product Gucci decided to revolutionize their product assortments to correspond with the seasonal trends. In addition they increased the quality of their products comparable to Hermes and offered these products at a value to meet the consumer’s needs. Furthermore, Gucci tailored their product assortment in each DOS to local customers to attract more consumers in the local markets. To better forecast product demand for seasonal goods and to keep inventory costs down Gucci added customer intelligence to the decision making process to better understanding consumers buying behavior. In order to obtain higher profit margins and offer a comprehensive line of products it was necessary for Gucci to diversify its portfolio. Hence Gucci introduced items from scarves to fur coats. To remain focused and maintain its â€Å"luxury status†, Gucci did not introduce diffusion product lines. Gucci had initially set its prices too high hence reducing their retail prices by 30% was necessary to attract and maintain customer loyalty. In order to generate demand for the product Gucci doubled their advertising and turned Tom Ford into a celebrity hoping to attract media and attention from around the world. To restore Gucci’s image as a high end luxury goods retailer they renovated all of their stores to support this new image. In addition all internal and external communications had the same look and feel to convey a consistent brand identity. Furthermore, they reduced distribution through retail stores that didn’t support the new brand image regardless of sales. Gucci launched an official web site to create awareness and exhibit new product lines and to position themselves against their competitors. Suppliers Suppliers are a key driver of profitability—a key competitive force. Suppliers are responsible for delivering a premium product that satisfies the company’s standards in quality and that reflects Tom Ford’s creative vision. Without fast turnover to meet fashion forward trend demands and a quality product, the repositioning of the Gucci brand could not have taken place. To fulfill this vision Gucci created an incentive program to keep suppliers loyal to ensure a quality product was manufactured, on time delivery, and it would prevent the suppliers from forging relationships with Gucci’s competitors. In addition, Gucci made suppliers more efficient through technology and logistics investments, provided training for suppliers and built an EDI network allowing Gucci to efficiently communicate with partner suppliers through the production process. As more fashion products will be produced every season along with the classic products, delivery and meeting demand could become an issue if production processes are not efficient. Investing in suppliers ensures that supplier threat, which is high, is controlled and suppliers have incentives to stay with Gucci. Supplier threat is high because of there is an absence of substitutes suppliers. Switching costs are high for Gucci other suppliers may be producing for their rivals. Other suppliers may not deliver the quality and craftsmanship Gucci is expecting. In addition, other suppliers do not have experience in producing Gucci products (current suppliers have been with Gucci for long time). Hence they will have a longer learning curve slowing down the production process. There are few suppliers in specific regions: Gucci suppliers had production capacity to meet Gucci’s growth (20-30% a year). However, finding new suppliers would be going into Prada’s territory. With more growth, suppliers gained bargaining power with sub-suppliers and with Gucci. Initially, Gucci had power because suppliers worried that Gucci would go overseas for suppliers. Complementors Complementors are a not a high threat to Gucci because there only a few of them, media and advertising. Competition There are many firms in this industry because profit margins are high. However with the number and volume of MA activity on the rise, consolidation is imminent with a few big players left in the market. Consolidation among competition has given competitors lower cost structure resulting in a competitive advantage such as ad purchasing discounts and supplier negotiating power. The competitors have a diversified product portfolio to target multiple segments of the market. They dominate in particular segments, for example Hermes and leather bags. Since there is slow industry growth precipitating fights for market share is certain to occur. This may result in a high threat from competitors such as LVMH and Prada. Threat of Entry The threat of entry is low because brand identity and product differentiation has been well established in this industry. In addition, access to distribution channels is limited and the new entrant would be competing with already established channels of distribution for Gucci and others firms. Gucci and other competitors have substantial resources to fight back because they of their monetary resources and could obstruct the new entrant or buy them out.

E.J. Computers Case Essay Example for Free

E.J. Computers Case Essay Introduction The company I am going to be doing my project on is a small firm named E.J Computers. The company have been around for about a year and a half now and have 3 staff. Its run from a small shop, which they have just recently moved to and they are slowly expanding. Therefore I am going to introduce an Access database to help make the job of keeping the accounts work easier. Statement of problem The problem at the moment is that the company is currently using a paper-based way of doing their accounts. This way is still quite common, but it makes more work for the end-user, as he usually has to go rummaging through bits of paper and filing cabinets etc. Also a problem with doing it this way is that bits of paper etc could go missing and the data would be lost. Its slower, takes up more room and looks unprofessional. I am going to be creating a database for a computer store that sells various things, from computer parts and accessories to fully working systems. The database will consist of many tables, including ones for customer details, products, delivery etc. I will be making the database a relational database so that the tables will interact and it will make it much more easier for the end user to be able to do or get to what they want. A computer database will be a lot safer to keep the records on. If they desire the end user could use some form of data protection so that he viewing of the records are not accessible for anybody (by either pass wording it etc). This way is a lot faster, less hassle, takes up less space and I think it looks more professional. So I am going to be creating a database, which will meet all of these needs. My initial idea is to create a database consisting of 4 tables, one for the customer details, one for the components, one for the ready built computer systems, and one for the orders. Results from questionnaire I wrote a questionnaire, and took it to my end user so that he could fill it in. I got it back, and now I can use the information that he provided to enable me to design my database to suit his needs. Basically he has the appropriate equipment that is required for him to be able to use the database and he also has the knowledge. From the feedback that I got, he basically has left me to my own device on the formatting side, which is good because I can use my imagination a bit and hopefully make a good design. The end user has also said that he would also like a password on the database for data protection. This ensures that the confidential data of his customers remains confidential. He also said that he would like his database to consist of 4 tables, one for customer details, two for product details, and one for order details etc. Information about end users computer Fortunately, the end user already has a suitable computer system to enable him to use the database. The current system is an AMD Athlon 1500+ 512mb DDR pc2700 RAM, 40GB HDD, 40x CD re-writer, 3 1/2 Floppy disk, 17 CRT Monitor. He also has sufficient software, which is a bonus. Is current operating system is Windows XP professional and he also has office 2000. Description of the previous system Input of the previous system At the moment the whole system is paper based. If a customer purchases an item, their details are written down on a little white card, this includes their name, address, telephone number etc and then it is stored into a filing case. Eddie then has to write out a receipt by hand and issue it to the customer. If a customer requires delivery, there is an extra fee for postage and packaging and their information gets put into a separate file where at the end of the day it will be processed. Process of the previous system After the information is collected it is left. Hey dont use it for anything else like advertising or sending special offers. It is just stored in a cupboard and every time a customer phones up or comes into the store and purchases a product it is taken back out and another card is filled in. Output of the previous system Again, the information is not used for output at all, the do not send special offers or print receipts. The receipts are all manually drawn up and written out. All products are paid for up front; no credit is given so there are no fines and no need to use the data for output. Method used for the previous system Data Flow Diagram of the previous system Problems with previous System Main problems with the previous system Problem Solution Time consuming Database will be easy and quick to access and use. Storage All data will be stored on the computer and will be easily accessible and found. Untidy work area Database will be on a computer, which will be neatly stored on the desk. Untidy work All work will be word-processed, therefore the data will all be neat and easy to read. Unsafe Data The database will be pass worded so that no unauthorised access will be possible Requirements of the new system Objectives of the new system Using access 2000 I will be creating a database for the company, this will make the system a lot better for my end user. To enable me to get an idea if what my end user actually wants he has filled in a questionnaire for me. This should help me understand fully what the end-user wants. My database will consist of four tables, each table representing different parts of the company. The first table will be a table for the customers details, it will store the details of every customer that comes into the shop and purchases an item. It will store their name, address, telephone number and each one will have their own unique customer ID number. This information can then be used for any marketing schemes that my end-user comes up with and the data will be handy at all times. My second table will contain information about the components that are available for the customers to purchase. It will consist of a list of the products that the shop has on sale and the type of that product. It will have the price, the amount that the business has in stock and a short description. The third table will consist of a list of pre-built fully working systems that are on sale; it will have a field for system ID, the price, number in stock, and a specification of each computer system. I will then have a fourth table consisting of information of the orders that have been placed, it will have the customers ID, the ID of the product that they have ordered, how much it will cost, and whether or not it need to be delivered. How the objectives will be fulfilled Description of the new system Input of the new system As I said above I will be putting the customer and product information details into the database using a mouse and a keyboard. I will be using a mouse to select to appropriate options and applications. I will also be using a VDU so I can actually see the information that I will be putting into the system. Process of the new system The process of the system is going to be pretty simple, I spoke with my end-use and we decided that I will make queries and sorts for the tables so that the information is easier to find and get hold of. We decided that it would be a good idea if I also include a mail merged letter so that things do not have to be written time after time. Output of the new system My end user has out the point across, that the output of the system is not really as vital as the input. The main purpose of creating this database is so that the details are stored safely on the computer. However a printer will probably be needed for the purpose of printing out records, and letters etc. This is not a permanent thing and maybe things will change later but for now this would be the only output. Performance criteria and limitations of the proposed system Qualitative My database solution will enable the end user to be able to sort the customers surnames into alphabetical so that it makes it easier for the end user to be able to find a customers records. My end user will also be able to sort the prices of everything that he sells into price order (for example cheapest to most expensive). This will make it easier for the end user, so that if he gets a customer asking about certain products that are on sale he can easily do a quick sort and be able to tell the customer. Quantitative With the solution I have made my end-user will be able to find the following: * Begin using the database within 30 seconds of opening it. * Find a customer using name or ID within 15 seconds. * Find a certain product with information within 20 seconds. * Find out if there re any deliveries that need to be made within 20 seconds. System flow chart Software and Hardware considerations Hardware The hardware that I will be using to create my database is as follows: Computer system: 1.0Gghz Celeron Processor 256mb SD RAM 20gb HDD Internal AGP SiS 8.0mb GFX card 15 Cathode Ray Tube (CRT) monitor Sufficient size display so I can easily see what I am doing. Keyboard Standard RM keyboard enabling me to get the job done. Mouse 3 button Key Mouse to make selecting options easier. Laser Printer Printout copies of the work I am doing to take to my end-user to make sure it suits his needs accordingly. Some of my project will have to be completed at home in my own time on my own computer; my own computer consists of: AMD Athlon XP 1700+ 768mb DDR PC2700 RAM 40gb HDD NVIDIA Geforce4Ti 4800 SE Creative Sound Blaster 5.1 Microsoft Intellimouse Explorer 3.0 Optical (USB) Logitech Internet Navigator(tm) Keyboard Special Edition Black Software The software that I will be using to create my database is as follows: Microsoft Windows 98 SE Operating System Microsoft Windows NT Network Microsoft Office 2000: Word Access Mainly using access because it enables me to perform complex searches, have a splash screen and create an advanced database system. Excel FrontPage Outlook The software that I have on my computer at home, which will allow me to be able to design the database, is: Microsoft windows XP professional corporate edition Microsoft Office XP: Word Access Excel FrontPage Outlook Data security of the new system Use of passwords I am going to be using a password for my database, as my end user has requested it. My end user will need a password, to ensure customer confidentiality. The password will be a word requested by the end user and only he and his staff will have access to the password and therefore the database. I have suggested that my end user should change his password on a regular basis, to ensure that if the password is found out it will get changed again. This makes the whole system more secure. Also, to make sure that the system does not get infected by viruses I have also suggested that the end user invest in some form of anti virus software. The software I have suggested is Norton Anti Virus 2003 but it is down to the end users discretion whether or not he goes ahead with it. Differences and similarities between the current system and the proposed ICT solution Similarities There are not many similarities between the two systems, as the general idea was to change the system to make it a lot better. However there is one similarity between the two systems, the same information is entered into the database as is entered onto cards. This is only a small similarity, as the whole process is completely different now. Specification Design Possible solutions There were a few other possible solutions to my end-users problem; I came up with a number of alternatives but the database solution just seemed to stand out as being the best. The other solutions that I came up with which were taken into consideration by my end-user were as follows: * Swap the cards for sheets of paper, which could be stored in folder or filing cabinet. We decided that this would not be such a could idea, because its not really much of an improvement and my end-user needs a big improvement. * A spreadsheet using Microsoft Excel. We also decided against because is not a very efficient programme for the type of thing my end-user wants. You cannot perform clear searches or have different tables etc. * A table using Microsoft word. Again, we decided not to use word plainly because this programme is too simple and basic. It does not really include many advanced features like searches and the information cannot be stored neatly, which makes the information difficult to access. Reasons and justifications for final choice of software and hardware We eventually decided to go with the database using Microsoft Access, because overall we thought it was the best piece of software to use. A few of the reasons why we chose Microsoft Access are: * You can perform searches and queries * Data is easily accessed * Modern * You can create tables which are linked together * Create mail merged letters * Password In my hardware section I have already specified what I will be using for hardware. This specification of hardware is suitable for me to create the database because it offers enough speed and memory (both virtual and physical) to enable to be able to work efficiently. This is because the bigger the processor the bigger amount of RAM, all makes the computer a lot faster. Outputs required by the end user The outputs that are required by my end-user are: * Invoices So that the customer has a proof of purchases. * Splash Screen This is to improve the presentation of the database and to put information about the creator on. * Reports To enable the end user to print out hard copies of queries etc * Mail-merged letters So that the end user can automatically contact customers. Inputs and stored data needed to create the outputs Output What is required? Invoices Customer information, product information and details of purchase (date etc) Splash Screen My 1337 skillz Reports Results from queries from all 4 of my tables will be shown to make the reports, which will then be printed off so that the user has a hard copy Mail merged Letters Customers details, which can be automatically accessed. Processes that are required to produce the required outputs Knowledge and ability to use advanced package features Relationships The database that I will be creating will be a many-to-many. I will be in the form of first form normalisation. I will have four different tables, each having its own primary key that will be referentially integrated to a linking table, to make sure all the tables stay up to date.

My Personal Code Of Ethics Philosophy Essay

My Personal Code Of Ethics Philosophy Essay After taking this class I sit here and wonder. Am I the only one who has never realized how much ethics plays such a large part of the world today? I have always known that most businesses that I have worked in have a code of ethics but I did not realize why they have it. Until now after being in this class I have been looking at how ethics not only needs to be a part of a business but how it is such a large part of society in itself. For me I did not know how many different parts of ethics there are but how they play make me look at whats going on in the world today in an ethical way. Society today is full of chaos because it seems those that are younger than me have a whole different outlook on the world or is it that they dont know about how ethics plays a part in their lives. For example: During this quarter when at dinner I would sit with my teenage son and ask what does he knows about ethics and he looked at me like I was crazy. So I said to him do you think that you follow a code of ethics at school and he said yes. What do you think they are I ask? Well we have to follow rules, and have to respect the teachers by listening to them and doing the work they give us. By having this conversation with him at dinner we would talk about how there are ethical meanings that relate to his answers. I proceed to tell him how he basically has a social contract. David Gauthier contract theory is to show self- interested individuals should favor a minimally cooperative moral system (Waller, 2005, p. 68). He still did not understand so I used an example that I think I remem bered from school and that was Audi does not through his book bag at Mr. Lucabaugh and Mr. Lucabaugh listens completely to his response. Then I said basically the code of ethics at your school uses a contract theory because you agree to respect and listen to your teacher and your teacher agrees to respect and listen to you. He finally got it. With what is going on in the world today from the economy, the war, and what is happening in Libya if we as a society did not have any ethical beliefs there would be so much chaos that society would self destruct. A perfect example of this would be Libya and their leader Omar Gaddafi. This is similar to the second reflection paper that I wrote for this class. When I wrote that paper Egypt was in chaos and now it is Libya who is in a war of all against all (Waller, 2005, p. 64). In Libya the people are not only protesting against their leader Moammar Gaddafi and want him to step down. Gaddafi to me is defiantly using Dostoyevskys challenge which is using the utilitarian calculation by getting much pleasure at the cost of his people (Waller, 2005, p. 55). Could it be that Gaddafi needs to have a social contract with himself and that according to Thomas Hobbes our natural tendencies are toward murder and mayhem (Waller, 2005, p. 66) and he is out for himself. Gaddafi is an individual an d universal egoist. On one hand he wants for his country what will benefit him. He has been quoted as saying I will die a martyr (Metro, 2011) and on the other hand he says that he does not need help from any other countries and that they should stay out of Libya and the happenings with his country and people. Many countries have different outlook on this issue and most of it is because of cultural relativism this is how one culture has different value from another. This could be an example of America and Libya. For American culture we value people and the fact that we have free speech and that everyone should be free compared to Libya where the people their do not have the same rights of free speech and really are not free because if they go against their government they could die. Having ethical beliefs or morals in society is a positive thing because it helps control the chaos that would be if there were none. Ethical beliefs should also fall into individuals as well. If the individual person does not have ethics then how would they be able to socialize in an acceptable manner? Everyone has different ethical beliefs whether it is based upon religion or their culture or it could be based upon gender. Many people follow the Ten Commandments and that is their moral and ethical belief system and believes they were created to help control chaos and keep some order of peace in the world or within themselves. As a society we also have the Constitution of America which many people follow that as their code of ethics. And then many people will tell you that ethics and morals are passed down from generation to generation within the family. It does not matter what you believe or were they came from but that we may not be aware of the importance of them and how they rela te to our lives. In the Bible one of the Ten Commandments is You shall not steal now imagine if no one in the world has any morals or ethical beliefs. Everyone would be stealing from one another and no one would have anything that they could call their own. But by people having some type of ethical beliefs a majority of people do not steal because it would be against their code of ethics or moral beliefs. Immanuel Kant basic principle of ethics is Categorical Imperatitive says always act in such a way that you could and will act (Waller, 2005, p. 22) which is basically saying do unto others as you would have them do to you . So if you want to be treated well then you should treat others well. If people did not have this ethical belief to follow then there would be more people in the world that only look out for them and have no consideration for others. This could also be related to virtue ethicist Aristotle who says that virtuous person is not one that does the right act but one who consistently does the right act and for the right reason (Waller, 2005, p. 98). You might ask what does this have to do with individual ethical belief well if you think about it. Because people who do not steal have made it a habit not too and for that they consistently do the right thing. Another example could be as babies most of us were taught not to hit someone because that is not right and it could be against the morals of your family not too. So we eventually grow up that the right reason not to hit someone is because you would not like that to happen to you. When it comes to ethics many people do not relate it to critical thinking. Critical thinking can play a large role when it comes to ethics because when people start having conversations about anything that can be ethical it can turn into a heated argument or if they do not like what they are hearing they will use the red herring fallacy. Red herring fallacy is what they call a common argument trick (Waller, 2005, p. 2). For example: You and I are having a discussion about the war and I do not agree or like what you are saying so I change the conversation by saying I see, did you know that the Red Sox won the game yesterday. If more people take on the charity fallacy which is to be charitable or generous toward the positions and argument we oppose (Waller, 2005, p. 4). The perfect example of would be you are having a conversation about the war and how they agree with it and you listen to them and calmly respond yes but. As people get older and our minds get more developed we realize that men and women are not only physically different but emotionally different as well. Women become more act utilitarian because we want to increase pleasure and decrease suffering for everyone compared to men who become more rule utilitarians look at the act. It is known that women are more emotional and think differently from men. For many women care ethics plays a large role in morals. Care ethics emphasizes on the importance of affection, friendships and relationships (Waller, 2005, p. 119) which is for most women the core of their feelings. A good example of this could be a couple goes out to dinner and while walking to the restaurant the wife wants the husband to hold her hand and the husband does not want too. This is the women wants to feel some type of affection and the guy does not. Another example would be a guy usually does not care if he doesnt talk to some of his friends were it would really bother a women because her friendships are important in her life. I decided to go into this class with an open mind and by doing so I can actually say that I look at ethics in a much different perspective. I dont think I have ever really thought about ethics other than my own beliefs or corporate ethics. I realized how I never really looked at my ethical beliefs and how they may not be the way I think that I live my life. By this I mean the teacher used a scenario about a little girl and someone was going to kill her if I did not lie. For me I do not believe in telling a lie or getting lied to. As the teacher continued with the different scenarios and I kept saying I would not lie, he finally said over the brake really look at yourself and what you say or respond to things even the smallest of things and see if you lie. So I did just that and low and behold he was right. . I am finding that it is hard to live 100 percent ethically on my beliefs. As I was writing this I am trying to think about myself and what how the different parts of ethics fit into my life and can say that I am an act utilitarian because I do go through life wanting to not only have maximize pleasure but the people involved in my life and try to minimize the suffering of people involved in my life which is a hard thing to do. For someone whom I may be in a relationship whether a friend or on a more intimate level I can understand the social contracts that we share that we try to be as honest as possible to each other agree to not to cheat on each other even though tendencies may take us elsewhere. I also believe that we all must do what is in the best interest for each so that could make me follow the universal ethical egoism theory. When I think of virtue ethics, I think about myself and what or how I think of individual character. Many people say that I am kind, caring and very considerate person. That always think about other people and how I can help them. This would be because my moral belief is that I treat others as I like to be treated. So if you want respect then you have to give respect. But I also think about how I feel when I help someone which would be the care ethics part of my beliefs. . I myself know that I am consistently kind to people and care very much for people in my life but also for the elderly, kids and pets and I do this for the right reasons and that would be because it makes me feel good about myself. Without ethics whether personal or for society in a whole the world would not be able to function in order and there would be chaos beyond control. Everyone has ethics whether they are taught them in the home, from the bible or from government itself makes everyone a better person or country. For me taking this class has defiantly made me look at myself and what I honestly think and how I much of an ethical individual person I am. I also know that as we get older me ethical beliefs can change. I have also learned that even though we may not agree with other peoples beliefs we should be open about them and are able to have conversations with bringing anger or disagreements in them. Reference Page Metro. (2011, February 22). Gaddafi: I will die a martyr. Retrieved March 3, 2011, from Metro: http://www.metro.us/newyork/international/article/781278gaddafi-i-will-die-a-martyr Waller, B. N. (2005). Consider Ethics Theory, Readings and Contemporary Issues. New York: Longman.

Biology, The Five Major Compounds :: essays research papers

Compounds That Compose the Human Body   Ã‚  Ã‚  Ã‚  Ã‚  There are five major groups of compounds that compose the human body. They are carbohydrates, lipids, proteins, nucleotides, and water. These are all very important to humans and without them we would not be able to survive. They have many functions that encourage a human cell and a human body to function.   Ã‚  Ã‚  Ã‚  Ã‚  Carbohydrates include sugars and starches, contain carbon, hydrogen, and oxygen which appears in a ratio of 1:2:1. Carbohydrates are classified according to size as monosaccharides, disaccharides, and polysaccharides. The primary function of carbohydrates is to serve as sources of energy. Carbohydrates are some of the most numerous molecules in living organisms. They play a major role as food molecules in the cell, being broken down to produce energy. Polysaccharides play an important role serving as energy reserves also. It provides a quick-release energy source that keeps us going between meals. Small amounts of carbohydrates are also used for structural purposes and others are attached to outer surfaces of cell membranes to guide cellular interactions. For many cells, sugars are the most important source of energy.   Ã‚  Ã‚  Ã‚  Ã‚  Lipids are important because they function as structural components of cell membranes, sources of insulation, and a mean of energy storage. The lipid molecules are most well known as forming basic structures of cell membranes and as energy storage molecules as well. In this group of lipids, there are about three main types: true fats (triglycerides), phospholipids, and steroids. True fats represent the body’s most abundant and concentrated source of usable energy. When they are oxidized, they yield large amounts of energy. They are stored chiefly in fat deposits beneath the skin and around body organs, where they help insulate the body and protect deeper body tissues from heat loss and bumps. True fats are a storage form for excess food, they are stored energy. Any type of food consumed in excess need to be converted to fat and stored. Phospholipids although similar in structure to the true fats, are not stored energy but rather structural components of cel ls. Lecithin is a phospholipid that is part of our cell membranes and myelin provides electrical insulation for nerve impulse transmission. The third group is steroids and cholesterol is an important steroid. Cholesterol is another component of cell membranes and a form of cholesterol in the skin is changed to vitamin D on exposure to sunlight. All of the sex hormones like estrogen and testosterone are also steroids.

Abraham Lincolns Emancipation Proclamation :: American History Research Papers

Abraham Lincoln's Emancipation Proclamation Until Abraham Lincoln issued the preliminary Emancipation Proclamation on 22 September 1862, the President’s enunciation of Civ il War aims centered squarely upon the restoration of the Union, and purposefuly omited the inclusion of the abolition of slavery. Dismantling the institution of slavery was not his ultimate objective, and Lincoln was forced to pursue a war strategy tha t would not push the slaveholding border -states into the open arms of the Confederacy. General John C. Fremont, however, living up to his reputation for impulsive acts and liberal interpretations of his own authority, proclaimed the freedom of any slave c onfiscated under his command in Missouri. This order ran counter to Lincoln’s war strategy and threatened to deliver Kentucky and other border - states to the Confederacy. Nevertheless, although Fr6mont’s decision was injudicious and unconstitutional accord ing to Lincoln, the conditions in Missouri, the strategic importance of hol ding that state, and the latitude given by the inistration to Fremont in his western department command, indicate that his order may have had military and political value, but th at it was il timed. As a result, Lincoln did not censure or relieve Fremont for this particular act, but congenialy asked him to amend his proclamation to avert unwanted political and military consequences. Lincoln’s belief in the utility of emancipati on as a tool to defeat the South was demonstrated a year later with the issuance of the Emancipation Proclamation. Expressions of Character —Who was John C. Fremont? In the course of a lifetime, each person wil act and react in various ways when he or s he is confronted with particular circumstances and situations. While individual expressions of behavior can be misleading, paterns of behavior can reveal true character and values. Fremont is no exception. Long before he proclaimed the slaves of Missou ri’s Confederate sympathizers to be free, Fremont frequently acted and interacted in a manner that indicated an aversion to authority, an enduring pride, and an impulsive and independent nature. The strength of these characteristics wil be made clear in a discussion of his emancipation order, but first it is necessary to examine a selection of Fr6mont’s earlier experiences so that the order can be put in beter perspective. Expeditions. Fremont is best known for his role as an instrument of America n Empire as he surveyed and mapped the burgeoning American frontier.

Music Censorship :: essays research papers fc

Should Music be Censored? Once people hear about the United States they automatically relate the country to the word â€Å"freedom.† Little do they know that this country has many similarities to countries where censorship plays a major role in their daily lives, due to their government. One of the major issues that involve censorship within the United States is the question whether or not music should be censored; and how will parents or the government decide at what age it is appropriate to allow children to listen to music pertaining profanity? There are two sides to this issue; there are people who are for and there are those who are against censorship in music. At what point does action transcend from a matter of consumer choice to the matter of censorship? I think that the government and parents should not refrain their children from listening to different kinds of music, because once they do that, they deprive their children from knowing what’s happening in our society.   Ã‚  Ã‚  Ã‚  Ã‚  People that are for the issue of censorship are usually from the older generation. These people consist of government officials that have children of their own. They believe that music pertaining profanity is one of the main factors for the problems that occur in our society. Such problems consist of an increase in violence and drug use amongst adolescents. An example was the incident that occurred at Columbine High School, where the media and others looked towards music as one of the causes for the incident. They feel that the music promotes sex, drugs, and violence. Critics believe that the children are not quite mature to listen to music with profanity in it.   Ã‚  Ã‚  Ã‚  Ã‚  On the other side of the issue many people think , neither parent nor the government should censor the type of music their children listen to. â€Å"By withholding art it goes against the first amendment that deals with freedom of speech, stated as; Congress shall make no law representing an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or the press; or of the right of the people peaceably to assemble, and petition the Government for a redress of grievances (Graham).† Another reason why we should not have music censorship is because is that it makes people aware of what is going on in the world. It opens ideas, and brings a whole new meaning to â€Å"art†.

Marcel Duchamp Why Is the Fountain Art

The In-depth Artist of the What was Fountain originally submitted for and what happened to it? The 1917 urinal aka Fountain was originally put on display during a show promoting Avant grade art. Avant grade means advance guard which is a military term. Avant garde was art movement which originated in France in 1850 in order to open the eyes and more so, make fun of or shock the average or elite viewer. To put an everyday, ordinary item on display and call it art. For many of the upper class directors of the showing, this piece was ridiculous and they did not understand it and thought it an insult of sorts. Shortly after its first and only exhibit, the Fountain just happened to vanish. This particular piece was one of the more remembered pieces of these ready-mades that Duchamp produced. Other artists from 1850, which was the beginning of the Avant Garde Movement, to approximately 1970, also had well known pieces of art that was displayed to the elite, rich, and upper class viewers, including Andy Warhol, Rockefeller and Basquit. The pieces were to rattle there conscience and make them look deeper at ordinary pieces and more or less humble them in a way or make fun of their elite, snobbish, uptight, society waysSalvador Dali The Love of Zero, a 1927 film by Robert Florey. Is a piece of art like the Fountain plagiarism or is it art by virtue of selection? The piece of art similar to the Fountain could be considered plagiarism by some because the originality of the piece was not created by the artist themselves but by someone else. The artist merely used another persons ordinary, everyday invention or household item per say and displayed it as a piece of art. The ordinary item then transformed from the ordinary item with a humble use and purpose to a piece of art on display causing the viewer to search deeper for what the artist might have meant by using it. The same piece could also be considered Art by virtue of selection as well. Being that the particular art piece on display has a different meaning for each viewer; the same piece put on display by different artists would again have a different meaning to them as well. Any artist could have a collection of pieces that he feels is his very best masterpieces while a viewer may see that same collection as the worst thing he has ever seen. It is all in the eyes of the beholder. Art by virtue of selection means that is a selection from or by the artist as to what he feels is a appealing or is what he would like or prefer for himself. With that, we have to appreciate that each of us are unique and have our own individual tastes. 3. What is the Dada movement? What piece of art spawned the Dada movement? Dada movement originated in Zurich in 1916-1923 was also called (The Non Movement By Shelley Esaak). A group of artists and writers, during World War 1 went against the war and the society and cultures of the viewer that condoned the war or caused its production . This group were similar to the hippies of the 60s, who protested against the government and war, but did so with humor, wittiness and sarcasm but not anger as the later. , Duchamp, being among that group, was the creator of many of those sarcastic pieces and had made fun of already well known pieces of art. They took different subjects, altered them in hoping that the upper class citizens or the elite would love it, hate it or take it as the sarcastic, humorous and witty piece they had intended for it to be. A good example of this is the portrait painting of the infamous Mona Lisa by Leonardo da Vinci. Duchamp had doodled a mustache and goatee on the womans face. Of course this was humorous. to many and insulting to others, more so to the elite, high society followers of the latter. Duchamp and his fellow artists were not necessarily defiling or demeaning the art nor trying to be angry and confrontational; but more so get the attention of the viewer to not focus on the war at hand, their high life living, governmental rules and beliefs 4. Look through Duchamps other artwork? What pieces do you like and why? What was his inspiration for those pieces? After researching with great intrigue and interest in the meanings of not only Marcel Duchamps work, but his entire lifes events. He seemed to have such a deep, comical at times to the point of almost sadness image and view of the world around him. It is hard to decide if he is mocking society, making fun of it and thinks him superior to just very observant to the human perception. I was especially interested on his self portrait of himself as an infamous, black, socialite, librarian, Belle da Costa Greene. Whose parents had. Resided in the nations capital until they divorced . Her, her mother and siblings were able to play off that they were of a white heritage with their light skin. She went on to be the personal librarian to JP Morgan and then to his son Jack. With her profound beauty and outspoken intelligence, she became accepted as a highly elite socialite among the tradesman, dealers and Madison Avenues society. She had never married and lived as the Morgans personal librarian till her death retirement in 1948 and death two years later. Her well known expertise and unlimited available funds to make trades for her extensive built library she was very well respected and able to be mingle amongst the highest society groups, she once announced, Just because I am a librarian with a and inheriting a large sum of money An announcement she had made as a motto per say for herself, Just because I am a librarian, doesnt mean I have dress like one. She had designer clothing and rare exotic looks, was once asked if she was Mr. Morgans mistress and her only response was We Tried Mr. Morgan had left her $50,000. 00 in his will. The in-depth information was forthcoming to the conclusion of my personal perception and Marcel Duchamps meaning behind the portrait of himself dressed as an elegant socialite: Rrose Selavy Was he making fun of her and the secrets she kept of hersefl througout her life or was he just intrigued by her as well as others who was her aqaintances? I find it interesting take as to think he would be using her as a readymade perhaps Rrose Selavy (Marcel Duchamp).

Note on the Character of Angulimala

Ans: Angulimala was a thief, a vicious robber, a murderer without mercy, who made villages into non-villages, families into non-families, slaughtering them and cutting off and wearing their fingers in wreaths around his neck. As he wore the garland of fingers, he was called Angulimala. The word â€Å"Angulimala† means ‘a garland of fingers’. In the region, where he lived, he was called the second ruler after the king. People were afraid of him. They obeyed him as they obeyed the king. People were so much scared of him that they never dared to travel alone. They even were afraid to travel in groups.Angulimala was a strong man and a great runner too. No one could escape him. He even caught elephant, deer, horses, even a group of acrobats from the circus. Even though Angulimala was a vicious robber, a merciless slaughter, there was a little goodness inside his heart which even he himself did not know. When Buddha explained a simple truth of life, he was pierced by th e words. His goodness, the softness of his heart emerged with great force. A sudden change came to his heart. At once he surrendered himself to Lord Buddha. He buried his evils with his swords and weapons and became a monk.After that Buddha sent him to the city for alms. There Angulimala witnessed the poor condition of the people; he could feel how much he had tortured the people. When he entered the city for the next time he was also tortured by the people very badly. As Buddha said, that act made Angulimala sinless and a pure monk. Then Buddha gave him his own begging bowl and robe and left him. Angulimala came in this way to understand the joy of freedom. Thus, though Angulimala was a cruel, merciless villain, he was later transformed into a sinless, soft hearted monk with full of goodness inside him.

Airport Security, Past and Post 9/11 Essay

Only from incidences of air piracy, terrorism, and changes in the social and political climate worldwide has airport security slowly morphed through the rulings of the Federal Aviation Administration (FAA). However the attacks of September 11th 2001 had changed airport security vastly in the matter of days. Michael Chertoff, the assistant attorney general in charge of the criminal division at the Justice Department during the attack of 9/11 stated, â€Å"Like many people at the time, I thought it was a pilot error. † Chertoff was the head of Homeland Security in 2005 to 2009. To his thinking, since the end of the Cold War, three developments have profoundly changed the world and therefore the world of security threats. One was that globalization radically changed the potential impact of a network or even an individual, offering the ability to travel, communicate, and exchange money. Two, the technology revolution has allowed people to cause massive destruction with just the push of a button. The third was the increase of â€Å"ungoverned space† where there is no true rule of law, has enabled terrorists to recruit, plan, and train undetected. During a discussion, Chertoff outlined the shift in the nation’s approach to security, one he argued happened before the attacks of 9/11. The actions of that day only served to highlight â€Å"something we hadn’t recognized and which the law had not adequately accounted for,† and underscored the need for a new framework aimed at combatting terrorism. What are the events that had shaped airport security before the attacks of September 11th 2001? Airline hijackings were very frequent in the mid to late 1960s. They most commonly were committed by individuals seeking transport into Cuba. This caused airlines to apply policies of screening all passengers and bags before they are to board the aircraft. The FAA applied this new policy in an effort to avert the carrying of weapons used to compel hijackings. During the mid-1970s through the early 1980s, multiple high-profile terrorist hijackings and attacks were carried out overseas and shocked the traveling public and the airlines, arising potential problems of acts of terrorism toward the airline industry within the U. S. However incidents in example of those were still perceived as an event that would never happen to or in the United States. This perfectionistic thinking was shattered in 1987 when a Pacific Southwest Airlines’ ex-employee made use of an expired identification badge to pass through security, board a company jet liner with a weapon and shoot his supervisor, the pilot and co-pilot leaving the aircraft to go down with 38 people aboard. Not only was this not a terrorist event, but it came from within the ranks of the airline industry itself. This event, attached with the 1988 bombing of PanAm Flight 103 over Lockerbie, Scotland, demanded attention to the need for additional airport security measures. This stimulated the President’s Commission on Aviation Security and Terrorism (1989) and the following passage of the Aviation Security Improvement Act of 1990. Since these incidences, the FAA has applied numerous measures to protect against this and other types of acts of air piracy and terrorism in the U. S. Some of the measurements were practical while others included physical and electronic security measures. The Abundance of the focus had been on regulating the access of persons into the operations areas at airports, therefore limiting access to aircrafts. In 1989, the Federal Aviation Regulation was written into law. It mandated that an airport must be able to implement control over an employee’s right to gain access to the airport’s operations area using an access control system. In detail, this regulation states that any airport with a regular passenger aircraft service (one flight per day) that consumes 60 seats or more must be able to; (1. Ensure that only the persons authorized to have access to the secured areas by the airport operator’s security program are able to acquire that access. (2. ) To ensure that such access is denied immediately at the access points to the individuals who do not obtain the authority of access. (3. ) Set apart persons who are authorized to have access to only particular portions of the secured areas and persons who are authorized to have access only to other portions of the secured area. (4. ) Have the capability to limit an individual’s access by time and date. This then new regulation produced an outbreak of airport access control systems. Systems in which were designed to incorporate unified access control and photo ID systems that operated as a single common database to accomplish the requirements of the Federal Aviation Regulation. Regrettably, the requirements had pushed the envelope of the technology available at the time, and many of the systems that were installed had provided less than satisfactory results. ? The FAA also is in the process of formulating a rewrite of FAR 107. A Notice of Proposed Rule Making has been issued that includes language that could significantly impact access control at airside. If passed as now proposed, the rule would require airports to be able to immediately assess alarms from monitored doors at airside and to create a log of the alarm, alarm verification and the response to each alarm. Short of placing law enforcement officers on each concourse, the solution is the installation of large numbers of CCTV cameras that are integrated with the access control system to provide automatic call-up at the monitoring location. Other future security issues being addressed with regard to airside operations security center around handling and screening of passenger baggage and air cargo. One area of major concern and concentration is on addressing the threat of unscreened/unaccompanied baggage. President Clinton created the White House Commission on Aviation Safety and Security. In the wake of the crash of TWA Flight 800 he asked the commission to focus its attention first on the issue of security, including an action plan to deploy new high-technology baggage screening and explosives detection systems. One system that will be implemented to protect aircraft against bombings is the electronic passenger/bag reconciliation system. Such systems have been in use in Europe for several years, but probably are several years from being implemented throughout the aviation system in the U. S. They utilize an electronically encoded tag or barcode that is attached to the luggage, and a magnetic strip, barcode or other scanable medium on the back of the boarding pass, to match the luggage with passengers boarding the airplane. As a passenger boards the aircraft, the boarding pass is swiped through a card reader, which supplies passenger information to the system database. If a passenger checks a bag and does not board the aircraft, a computer resolves this mismatch in the tracking database and issues an alarm indicating this disparity. The bag then is retrieved from the aircraft and scanned for content. This system prevents anyone from checking a bag with an explosive device onto a flight they do not board. The new Terminal One international facility at JFK Airport in New York will be one of the first U. S. acilities to be equipped with this type of electronic passenger/bag match system. Another area of baggage security that is changing is the screening of bags and parcels that are loaded onto aircraft. In the past, general screening of baggage for domestic flights has not been performed. Until the last several years, advanced electronic screening of international outbound baggage was limited. But an increase in terrorist acts, including the bombings of the World Trade Center and the federal building in Oklahoma City, has convinced government and industry that additional bag screening is necessary. As technology improves, this screening someday could include not only explosives, but also devices that present other types of threats. Since the machines are too expensive and large for airports/airlines to provide enough equipment to scan all bags with high-tech screening, a three-stage screening process has been established. Stage one utilizes more conventional high-speed x-ray scanners to look inside luggage and parcels. In stage two, suspect bags are routed to conveyor queues while x-ray images are re-evaluated. They then are routed either to a bypass conveyor or to third stage screening, which consists primarily of one of two types of advanced technology screening equipment. One type uses computed tomography, a scanning technology similar to a medical CAT scan. Another type uses dual-energy x-ray scanning to produce a three-dimensional image of the contents. As machines become faster and less expensive, airports will have enough machines to scan all luggage. New airport terminals under design are providing space for multiple machines and will be the first facilities to provide 100 percent screening of all bags. Since space requirements for these machines are so significant, the security consultant should be involved in new building design early on to ensure that adequate space is provided for the machines and baggage staging. One method or system being considered as a means to streamline the need for extensive bag screening is passenger profiling. This methodology utilizes a passenger profiling database containing certain passenger criteria to classify luggage for screening, thereby eliminating the need to scan all bags with high-tech screening equipment. Use of this database information could classify a passenger as low risk and may eliminate the need for advance bag screening of bags checked by that person. One major airline has developed software for this purpose which has been tested at a major hub airport location, but the system is very controversial and may or may not be implemented for general use. If and when the system is implemented, it will have extensive systems integration impacts that will require integration of airline common use erminal equipment host computers, bag handling equipment, airport security systems and explosives detection systems. This will require the security consultant to interface security systems with airline operations systems that in the past have been a non-issue when designing airport security systems. Since most of the systems mentioned above are information technology based, it will require the consultant to become increasingly knowledgeable about local area networks, wide area networks and the world wide web. Changes also are taking place with technological advances in systems utilized at the security screening checkpoint where passengers and their carry-on baggage are screened prior to boarding the aircraft. One such advance is in the method used to watch the exit lane. New systems are being developed which will assist with the arduous task of watching the exit lane in order to improve security at this portal and to decrease operating costs. Presently, this task is done manually with a posted security guard, but a person in this position is subject to distractions, can daydream or at slower nighttime periods may fall asleep for short durations. New systems use electronic detection to supervise the direction of traffic through the lane and produce alarms when a person enters the lane from the wrong direction. These systems may be used to supplement the existing guard post or may replace the guard position, thereby decreasing the operations cost. What are the major focuses of landside/non-regulated security issues at airports now and through the year 2000? A primary area of concern is parking facilities. Security concerns and public safety awareness has increased with the rise in crime over the past several years. Crime in parking facilities has risen proportional to crime rates in most cities. Parking facilities present opportunities for crime since vehicles are left for extended periods of time, and people traversing to and from their vehicles are subject to isolation and are more vulnerable. Crime concerns at parking garages include vehicle theft, vandalism, vehicle break-in and crimes against persons. Security directors at colleges, hospitals, shopping malls, manufacturing plants, sports facilities and other places with large parking facilities have been focusing on security in this area for the last few years. In order to provide increased public safety, airport operations and police departments are beginning to take a more serious look at the need for implementing additional security methods and systems in their public and employee parking facilities. What types of systems will be installed to reduce crime in airport parking facilities? Systems similar to those that have been installed at parking garages and lots associated with the other types of public and private sector facilities previously mentioned. There is and will continue to be a very heavy emphasis on CCTV systems because they act as a good deterrent to crime, as well as a tool to verify alarms. But with so many cameras required to watch large parking garages having multiple parking levels and many aisles, integration of other systems will be required to automate and simplify the process of trying to watch and utilize large numbers of cameras. Systems that already are widely used in other types of public parking are becoming more common at airport parking facilities, including emergency phones, ambient noise alarms and wireless personal assistance alarms. Additional systems including such items as intelligent video motion detection are in the process of being developed and will be used in the future to further assist with automated camera watching. Other areas of concern for improving landside security at airports include supervision of roadways, security at station platforms for automated train systems, security for vendors, protection of ATMs and guarding of toll plaza booths. In concert with both landside and airside security issues are the expansion and improvements to the communications and emergency operations centers that monitor and control most of the systems mentioned in this article. Upgrades to these facilities generally require relocation of or modifications to nearly all these systems.

Plant Layout Is Fundamental Health And Social Care Essay

Plant layout is cardinal and attending and consideration from the beginning are needed so as to forestall subsequent jobs. Although there could be different layout, the better 1 is still the one which is inexpensive and systematic. It includes scientific usage of work country, agreement of machines, easily screening out of stuffs or convenient conveyance system. Once the location is selected, the lone thing which can be adjusted is factory layout. Undoubtedly, layout is made for aims. For illustration, one aim is that the supervising of the work is easy and the stores remain clean and orderly. The merchandises with good quality should be produced at inexpensive cost and it should be easy to manage the stuffs which should be transported at a minimal cost in a minimal clip. Furthermore, maximal usage of the infinite country and better productiveness is besides the aims. Besides, congestion points and constrictions should be avoided and material waste should be minimized. All in all, it should be rushing of production and easy and simple care of works. As mentioned, works layout is critical portion of runing a cost effectual and efficient concern. Material storage installations, work country and production lines should be designed to execute to the highest rate and shortest rhythm clip as good. It is necessary to see all the maps within the concern when planing a works layout. The design should include the demands for the present concern degrees and commissariats for future enlargement. And avoiding frequent and dearly-won alterations to the design as demand additions should besides be considered. As a company proprietor, they should execute this survey prior to any works layout design. This will supply a clear apprehension of the present and future demands of the concern and the interaction of each section and will be used to plan the installation for the most efficient and productive work flow possible. As for Toyota illustration, we can non tie in the Toyota production system with the kanban system. Kanban system is one of the methods of control utilized within the Toyota production system. The Toyota production system is alone and alone. The thought behind it and the method of execution have been perfected after long old ages of test and mistake. It is a system of production, based on the doctrine of entire riddance of waste, which seeks the uttermost in reason in the manner we make things. We call this the Toyota system. Merely when the Toyota production system in its entirety is satisfactorily conducted, can at that place be an effectual use of the kanban system. Without altering the method of doing things, it is impossible to prosecute in the kanban system. Here is the chart about the panoramic position of the system. An~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~An ideal status for fabrication is where there is no waste in machines, equipment and forces, and where they can work together to raise the added value to bring forth net income. In order to near this ideal, we have devised a system in which the stuffs needed are obtained just-in-time which is precisely when needed and in the measure needed. On the other manus, for this ideal status to happen in the line operations, including machines and equipment, if there is abnormalcy, everything must be stopped instantly at the discretion of the worker or workers involved. The grounds for the happening of abnormalcy must be investigated from the land up. This is what we call mechanization with a human touch. We believe it is best to fabricate everything in a balanced mode. This load-smoothing production serves as the base for the two pillars of the Toyota-system, viz. the just-in-time and automa tion-with-a-human-touch attacks. In a normal workplace, the more the flow of things varies, the greater the incidence of making waste. The capacity of the workplace is frequently adjusted to the peak work demand and non to its mean value. At Toyota, there was a clip in which this was the normal happening. The industry has multiple types of parts in multiple Numberss. The procedure it must travel through is a really complex 1. The lone feasible solution for most auto industries has been to keep a certain sum of stock list on manus. They have planned in such a manner that every line will hold some work to make every twenty-four hours. However, this attack is a dearly-won one, because it requires keeping a parts stock list three to four times larger than that required when the assembly line has an equalising system of production. The waste created is tremendous. To hold a successful system of equalized production, Toyota must equalise non merely the measures but besides the types. Let ‘s take an illustration, Corona series. Toyota has a production agenda of 1000units a twenty-four hours. All unites are different in their engines, transmittals, external colourss and insides. Toyota scatters them all and does assembly work. They do n't bunch all ruddy Corona together and allow them flux in sequence because they want to equalise the types. If they allow autos with red-colored outsides to be placed on the assembly line to the exclusion of others, ruddy seats and interior parts will flux really to a great extent in the forenoon. In contrast, in the afternoon, there may non be adequate work left for those covering with the ruddy colour. As for the engine, they try to allow the 2000cc and 1800cc engines flow approximately in proportion to the figure used. As for the left guidance wheel autos for export and right maneuvering wheel autos for do mestic usage, the deciding factor in the assembly line is the gross revenues records of that peculiar clip. Or we may do every 3rd auto with a left guidance wheel. There must non be extremums and vales in Toyotas work, even in the minutest parts of the procedure. In so making, they can continue to the equalising system of production for their full procedure. This equalisation of the measures and the types is called burden smoothing under the Toyota system. The load-smoothing system of production is the major premiss for the riddance of waste. The kanban system can win in a topographic point where the concluding procedure is under the load-smoothing system of production. If there is no load-smoothing system of production, the kanban system will neglect. How to allow things flux? For illustration, we assume that five types Corona auto Angstrom to auto Tocopherols are all assembled by lines entirely devoted to each. Therefore as seen in the diagram below, at Line A, unites are moved at a two-minute interval, but at Line E, merely one unit is assembled every 16 proceedingss. ~~~~~~~~~~~~~~P.54~~~~~~~~~~ When the separate sole lines are merged into one, the flow will take the signifier indicated at the underside of the figure. At Toyota ‘s assembly line, the autos may be the same Corona, but there are many different colourss, two-door and four-door theoretical accounts, left and right guidance wheels, all assorted together and interspersed while traveling through the assembly line. With this assembly line in operation, it becomes possible to hold burden smoothing non merely for the measures but besides for the types. The work done in this manner at the concluding assembly line warrants that equalisation can happen in all preceding procedures. These sole lines could merely every bit good be procedures devoted to parts. When all of these lines are equalized, so every line can hold equal work, and work can besides go equalized. When we engage in the load-smoothing system of production, we can set up standard operations throughout the full procedure, covering all procedures and lines. This is one of the chief ends of load-smoothing production. At Toyota, they manufacture through load-smoothing and figure out the rhythm clip and make standard operations. Then they can advance betterment activities. In a nutshell, the Toyota kanban system removes the signboards proportionate to the measure used, and goes to the predating procedure to retreat precisely the same measure. The predating procedure manufactures the exact measure merely withdrawn. The kanban system is a system that keeps on turning this rhythm. Assuming that the concluding procedure has non been converted to the load-smoothing system of production, but insists on utilizing the kanban to have parts, it is a bolt from the blue. The workplace can non utilize than kanban to order 50 boxes today, none tomorrow and 150 boxes the twenty-four hours after tomorrow. If the predating procedure or provider is treated in this mode, arrant confusion will ensue. Under the kanban system, the subsequent procedure withdraws parts and stuffs from the predating procedure every twenty- four hours, with consistence – in the same mode, at the same interval and in about the same sum. It is merely in this manner that the system can win. In Toyota system, they make the size of a batch in the workplace every bit little as possible. If the clip spent for interchanging dice ( one of the many thin production methods ) which provides a rapid and efficient manner of change overing a fabrication procedure from running the current merchandise to running the following merchandise is greater, the batch is likely to stay larger. When the batch is larger, it is frequently assumed that through it the calcium hydroxide lost though the exchange of dice can be recovered. But this can take to the waste originating from overrun. So, they make an beforehand readying of those casts, gigues and tools that can be assembled in front of clip, and to clean and put in their storage topographic points those casts, gigues and tools that are removed merely after the machine starts traveling once more. They keep seeking to better, those operations that can non be performed without halting the machine. So, the clip needed can be significantly redu ced. In interchanging dice for big equipment, Toyota retains the services of a particular unit organized by specializers in die exchange. Long times ago, it took at least 3 hours to interchange dice in an eight hundred-ton imperativeness. Today it takes merely three proceedingss. Assume that a mill is to treat parts A and B in sequence and they have four machines. They do non treat portion A at all four of these machines foremost, and so when this procedure is over, exchange all the dies in these four machines to get down treating portion B. if we did this, it would merely take excessively much clip. But Toyota chooses alternate method. Regardless of how many machines are connected to each other, a processed portion flows one by one with each rhythm clip. Therefore, they do non let anything to flux after the really last A. alternatively they let the air flow. While the air is fluxing into each of these machines consecutive, they engage in the exchange of dice. In other words, our set up alteration takes topographic point with one rhythm clip. At Toyota, they call this a one-shot exchange of dice. Since they use merely one rhythm clip for the exchange of dice, they merely encounter a loss of one portion piece. ~~~~~~~~~~~~~~ P.62~~~ In set uping a work combination, Toyota has some constructs in be aftering a layout. Alternatively of holding one conveyer line, Toyota prefers to hold multiple lines that are shorter. Toyota puts the entryway and issue together. When the entryway and issue to a procedure is made the same, one can prosecute in the pattern of â€Å" when one portion is withdrawn, another may come in. † In this manner, parts on manus in each procedure can stay changeless. More significantly, this layout can instill in the heads of workers the importance of the just-in-time construct. A 2nd benefit is that the work country becomes clearly defined. Just as with automatic machines, if a worker is stationed at the entryway and issue of goods, it is possible that no 1 else is needed. By seting the entryway and issue together, a worker ‘s work country becomes clearly defined. In this manner, his work becomes more efficient. Another benefit is that there is no otiose gesture. Where procedures are operated manually, the otiose gesture of traveling to some other topographic point and returning is eliminated. Finally, it becomes possible to hold fewer people consistent with the sum of work. To set the entryway and issue together means, in practical footings, to make a layout with a square bracket form, a U form or a circular form. In this manner, as discussed above, otiose gesture is eliminated and, depending on the sum of work required within these otherwise shaped layouts, workers can be added or reduced. Toyota besides uses a people-centered layout and dressed ores work countries. In Toyota, they do non allow one motor power multiple lines because a motor has extra capacity does non intend that it should be allowed to power both line A and B. Suppose A is burned ; so will B. Or when you want to run merely A, and B is non needed, line B still has to be moved. Under kanban system, the shop may keep many sorts of points, but the measure for each demand non be big. In rule, the shop ‘s layout should be one of wider frontage and narrower deepness. As for the stuff flowing, Toyota chooses to utilize smooth-flowing production system. To do the goods flow swimmingly, to raise productiveness and to allow the workers know that walking was besides portion of their work, around 1960 they began puting machines in a consecutive line, liberating workers from their machine enclosures. This new system had the advantage of allowing workers walk while working and manage a figure of machines. But jobs did originate. At first, we placed the machines in a consecutive line and made each group of these machines an independent production line. When we placed workers, based on the figure of autos to be produced, we frequently had a fraction of a whole individual assigned to each of these lines since we could non delegate a fraction of a individual, that figure was raised to one individual. No affair how of the group of line workers tried, each tended to overproduce because of the extra work force, even though it was little. Their solution was to u nite a figure of â€Å" independent † lines, and allow these lines absorb one full individual. They were able to do forces arrangement based on the alterations in the figure of autos to be produced. They still follow this work combination and now can bring forth merely what is needed. Hospital: Hospitals layout can be a really complex edifice types because infirmary includes a broad scope of functional units and services such as Hospitality maps, diagnostic and intervention maps, and the bed-related map or cardinal inmate attention. The specificity of codifications, ordinances or inadvertence which is regulating hospital operations and building can reflect this diverseness. Specific cognition and expertness are needed because of these wide-ranging and germinating maps of a infirmary but those functional units will vie for the precedences or demands. Ideally, the penchants must be balanced against existent functional demands, mandatary demands, and the fiscal position of the organisation. Apart from the broad scope of services which must be accommodated, infirmaries support and function different users. Ideally, the design procedure is integrated with direct input from cardinal hospital staff and from the proprietor in the procedure. The interior decorator has to be an advocator for the visitants, patients, support staff, providers, and voluntaries besides who do non hold direct input into the design by and large. All in all, a good hospital design combines functional demands and restraints with the human demands of its assorted users. Physical relationships between these maps decide the concept of the infirmary. These relationships between the assorted maps are needed which is shown as in the undermentioned flow figure. Flow diagram of general infirmary relationships. Inpatient gives and receives to/from outpatient, research & A ; instruction, diagnostic & A ; intervention, and disposal. Service gives to disposal, diagnostic & A ; intervention, and research & A ; instruction ; and receives from research & A ; learning. Administration gives and receives to/from inmate, diagnostic & A ; intervention and outpatient ; and receives from service. Diagnostic & A ; intervention spring and receives to/from disposal, outpatient, research & A ; instruction, and inmate ; and receives from service. Research & A ; learning spring and receives to/from diagnostic & A ; intervention, inmate, service ; and receives from outpatient. Outpatient spring and receives to/from inmate, research & A ; preparation, diagnostic & A ; intervention, and disposal. Flow diagram of major clinical relationships. Reception & A ; enrollment receive records and station infirmary attention patients and trade with entree. Admission receives from response & A ; enrollment and services inmate wards and outpatient wards. Records go to reception & A ; enrollment, outpatient, diagnostic & A ; intervention, and inpatient wards. Inpatient wards receive from records and entree and in turn lead to dispatch and pharmaceutics. Inpatient wards ‘ divisions ( medical, surgical, and psychiatric ) link to diagnostic & amp ; intervention ‘s divisions ( research labs, mortuary, surgery, x-ray section, P.M.E.R. ) . Dignostic & A ; intervention receive from records, and its divisions ( research labs, mortuary, surgery, x-ray section, P.M.E.R. ) nexus to inpatient wards ‘ divisions ( medical, surgical, and psychiatric ) and outpatient wards ‘ divisions. Outpatient receives from entree and records and in turn lead to dispatch and pharmaceutics. Outp atient ‘s divisions ( outpatient clinics and exigency ) nexus to diagnostic and intervention ‘s divisions ( research labs, mortuary, surgery, x-ray section, P.M.E.R. ) . Pharmacy receives from outpatient and inmate wards and gives to dispatch from both outpatient and inmate. Inpatient wards ‘ discharges receive from inmate wards and pharmaceutics and gives to post infirmary attention. Outpatient discharges receive from outpatient and pharmaceutics. Post infirmary attention leads back to response & A ; enrollment. These flow figures show the communicating and motion of stuffs, waste, and people. Therefore the transit and logistics systems and physical constellation of a infirmary are intertwined inextricably. The transit systems are affected by the edifice constellation, and this constellation depends on the transit systems to a great extent. The infirmary constellation is affected by site chances and restraints, environing installations, clime, available engineering and budget. Now, new engineering and medical demands generate new options. The one important illustration which must be mentioned is Emergency Department in United Hospital. The Emergency Department ( ED ) has become the ‘Front Door ‘ to the infirmary. But the flow to and through the Emergency Department is fraught with constrictions in many infirmaries, with conflicting and confusing messages environing ED. Hospitals with ill placed double or merely one entrywaies see the inefficient operation of those coming in exigency vehicles and self-arriving patients. Many EDs have hapless first brush systems. For illustration, ill designed intervention zones inhibit efficient operations. Furthermore, there are many layout illustrations which require inordinate walking to pull off the patient record, to acquire patients to an x-ray room, or to take supplies merely. These demands lead to increased length of stay within the section and holds in intervention, which besides lead to set much emphasis in staff likewise and patients. Inefficient patient throughp ut causes dearly-won and blemished patient dissatisfaction and operations. hypertext transfer protocol: //www.asianhhm.com/facilities_operations/emergency_department_streamlining.htmArrivalab initio, the layout of the ED begins to demo separate entrywaies for the two types of traffic and they were side-by-side today. However, if they are in close propinquity, it can still hold opportunity of uncertainness and confusion for the self-arrival patients as to which is the right zone. But now, apart from the ambulatory, the layout is to demo clear tracts for the ambulance. This separation begins at the reaching zone to the campus and continues to each entry. The ambulance entryway is spotted so as to non be in sight from those who come to the ambulatory entry. Direction to ED merely points to the Ambulatory Entrance. The demand for self-arriving patients to make up one's mind which entry would be right is eliminated by this agreement. The Ambulatory Entrance is unmistakably obvious and has a system to cover geting patients from the elements. A supply of wheelchairs should be accessible readily and doorway should hold hands-free operation. There should be staff from the infirmary at this point to help the patient to come in the infirmary which is frequently done by security forces.Electronic wellness recordsIn order to better and streamline patient flow, the use of the electronic wellness record is needed. The record of patient must stay closely to the unit clerk who manages the record, when a ‘paper ‘ chart is used. Because physicians, accessory care-givers and nurses must entree this unique and remarkable set of paperss, there are frequent uses but when the location of the chart is difficult to find, much clip is wasted by looking for it. The electronic record is allowed to take in anyplace within the infirmary, particularly at bedside of a patient. Coincident and multiple entree licenses retrieval an d faster entry of informations from the infirmary and from distant diagnostic services like he lab.NosologiesIf we can acquire diagnostic information in a timely mode, it would hold important impact upon patient flow through the ED. Sending the patient who requires X raies to the Radiology Department has becomes excessively troublous in footings of clip including waiting for a radiotherapist ‘s reading, line uping in the section or conveyance clip. This quest to heighten patient throughput causes puting medical imagination within the ED. A batch of patients seen in the section will find the figure of radiographic devices required, but multiple devices can be expected in ED. As for the instance of decentralised supplies, by agencies of decentalisation of diagnostic tools, the benefit of improved throughput can be generated, particularly if digital radiographic devices are used. Although digital medical imagination is filmless, multiple devices do non necessitate to be clustered for operational efficiency. And turnaround clip for image acquisition will be increased by puting a DR in propinquity to the ‘fast-track ‘ zone greatly. It can besides ensue in quicker diagnosings. A 2nd DR can so be placed to function more critical patients handily. Puting a CT scanner near to trauma bays can salvage clip in covering with dangerous situations.ADischarge procedureAfter medical clearance, the patient and his household are given discharge instructions and are released to go forth the infirmary or are admitted to the infirmary. Several stairss must be taken to topographic point patients in a bed if the patient is admitted. The motion of the patient out of the ED and into the bed will impact the overall patient flow greatly. The admitted patients become ‘boarders ‘ in the ED, if beds ca n't be found or location and assignment of beds is slowed. Then boarded patients will busy infinite that could be used to handle the following entrance patient a nd cut down the figure of beds which is available to make so. The handling of inpatient beds is a really complex issue, but it is cardinal that the infirmary be committed to a policy of timely bed handiness for those who need. Contemporary Emergency DepartmentFirst brush Upon reaching, the ambulatory patients must be recognized and given the clip to province his job. This is done by staff who conducts ‘quick enrollment ‘ which is a basic set of identifiers to register the patients into the infirmary ‘s record system but it takes a few proceedingss. The patient is placed rapidly there when beds are available and the enrollment procedure can be finished at the bedside. Supply System Configuration After the speedy enrollment, the patients are given a first appraisal by a clinician. This triage will judge the degree of the patient ‘s status and let the exigency forces to find the precedence to supply attention. The patient is shown to an ‘internal waiting country ‘ in the intervention zone. The patients can be reprioritized and observed, so it can acquire the right patients into a bed rapidly. In order to better patient flow, a policy for handling patients with lower hazard jobs such as lacerations should be developed. This impression of a ‘fast-track ‘ demands to be incorporated within the context of the entire intervention zone. And all beds should be capable of spliting any sharp-sightedness degrees. The fast path patients can be grouped in one country of the section but non isolated in a discreet unit. Based upon the fluctuation in volumes throughout the twenty-four hours, this will increase flexibleness in delegating patients to suites. However, ambulance patients have different paths into the ED. The status of these patients is communicated to the ED by and large by the ambulance forces who is an exigency medical specialty technician. Their reaching is anticipated and care protocol can be implemented quickly. However, there are state of affairss when multiple reachings occur at the same clip basically. A triage of these incoming patients will go necessary, when this happens. In high-volume ED, for illustration injury centres, be aftering for an ambulance triage station will afford sufficient infinite to work out with this job. At Toyota they assign Industrial Engineer to a steadfastly established direction function to heighten betterment in production activities. They start from the existent phenomenon, look into the cause and happen a solution. No affair how much information is provided through informations, it is hard to see the true image of the workplace through informations. When defects are produced, and they find out merely though informations, they miss the opportunity to take appropriate disciplinary action. Thus they may non be able to detect the true cause of the defects, ensuing in their inability to take effectual countermeasures against return. The topographic point where they can capture true province of the workplace is the workplace itself. They can catch defects on the topographic point in the workplace and happen the true cause. They can instantly take countermeasures. When a job occurs, if the mode of examining into the cause is deficient, steps taken can go blurry. At Toyota, they will foremost understand the cause and so seek to repair it. Although the end may be set high, its execution calls for patterned advance in phases. It moves from work betterment to equipment betterment. When good consequences can be obtained with work betterment, and when such work betterment has non been undertaken sufficiently, there is no justification for puting a immense amount in mechanization machines. The consequence of the debut of mechanization machines may approximately be that of a exhaustively conducted work betterment activity. In such a instance, the money spent for equipment investing is wasted. And Toyota will distinguish between man-hours and figure of workers, and between labour salvaging and people salvaging.